XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1234001.png)
Trunk / Liftgate Latch: Procedures
TRUNK LID LOCK MECHANISM
Removal
1. Remove trunk lamp assemblies. See: Service and Repair
2. Remove covers from the two trunk latch finisher securing bolts and slacken and remove securing bolts.
3. Remove latch finisher from trunk.
4. Release and discard the four trunk lid liner rear fasteners and position liner for access.
5. Release trunk open switch multiplug from retaining clip and disconnect multiplug.
