XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
Sunroof / Moonroof Motor: Procedures
Synchronization
Removal
1. Remove sliding roof trim panel for access.
2. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
3. Remove roof console for access.
4. Remove sliding roof panel control module. See: Sunroof / Moonroof Module/Service and Repair/Procedures
Installation
1. Using a drive key or screwdriver in the motor gearbox slot, manually move the sliding roof towards the closed position.
2. Position the sliding roof with an 8mm gap between the driven lever and the guide rail step.