XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1355001.png)
Sunroof / Moonroof Panel: Procedures
SLIDING ROOF PANEL
Removal
1. Remove sliding roof trim panel for access. See: Sunroof / Moonroof Interior Trim Panel/Service and Repair/Procedures
2. Slacken and remove sliding roof panel securing bolts.
3. Carefully withdraw sliding roof panel and seal from aperture.
Installation
1. If sliding roof panel is being renewed, fit new seal as detailed See: Sunroof / Moonroof Weatherstrip/Service and Repair/Procedures
2. Carefully position sliding roof panel in aperture.
3. Fit and tighten panel securing screws.
4. Fit trim panel. See: Sunroof / Moonroof Interior Trim Panel/Service and Repair/Procedures
