XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
Power Seat Control Module: Service and Repair
Front Seat Control Module
Removal
1. Power steering column to fully forward position. (Driver side only)
2. Power seat to fully forward and upward position.
3. WARNING: Following disconnection of the battery a period of at least one minute must be allowed to elapse before working on a front
seat with a side airbag fitted.
Remove battery cover and disconnect ground cable from battery terminal.
4. Slacken and remove seat rear securing bolts.
5. Slacken and remove seat front securing bolts.
6. With assistance and exercising care to avoid tensioning harness, tilt seat backwards and support for access.