XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1365007.png)
17. Release motor/potentiometer and gearbox harness multiplug from mounting bracket and disconnect multiplug.
18. Slacken and remove motor/potentiometer to frame securing bolts.
19. Disconnect RH seat slider gearbox drive cable from motor/potentiometer.
20. Disconnect drive cable and gearbox assembly from motor/potentiometer and remove motor/potentiometer from seat.
Installation
1. Position motor/potentiometer at seat and connect drive cable/gearbox assembly
2. Connect RH drive cable to motor.
3. Seat motor/potentiometer on frame and fit and tighten motor securing bolts.
4. Align potentiometer with gearbox and fit and tighten gearbox securing bolt.
5. Position and fully seat slider assembly to potentiometer and gearbox.
6. Position motor frame on LH slider and secure with new pop rivets.
7. Connect motor/potentiometer harness multiplug and install in mounting bracket.
