XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-836005.png)
4. Install caliper carrier to hub carrier.
^
Position carrier.
^
Install and tighten bolts to 60 Nm.
5. CAUTION: Retracting the caliper piston may cause the fluid reservoir to over-flow. Remove brake fluid spillage immediately from paint work,
with clean water.
Slowly retract piston into caliper housing.
6. CAUTION: Always install new brake pads, irrespective of the condition of the original pads, when renewing a brake disc.
