XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
2. CAUTION: Retracting the caliper piston may cause the fluid reservoir to over-flow. Remove brake fluid spillage immediately from paint work,
with clean water.
CAUTION: Note the condition of pins and "R" clips and replace if necessary.
Install brake pads into caliper.
^
Slowly retract caliper pistons.
1. Install pads.
2. Position anti-rattle spring.
3. Install pins.
4. Install "R" clips.
3. CAUTION: The brake hose must only be installed with the vehicle's body supported and the suspension hanging.
Install brake hose to caliper.
^
Remove plugs from caliper and hose.
^
Install new sealing washers.
^
Install and tighten union bolt to 22 - 26 Nm.