XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor
Removal
1. WARNING: BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL THE WARNING, NOTES ARE READ AND UNDERSTOOD.
Remove the battery.
2. Drain the fuel tank using a suitable suction pump/tanker. If the On-board Refueling Vapour Recovery (ORVR) system is fitted, refer to Fuel Tank
Drain Procedure for ORVR System.
3. Remove the trunk front liner.
4. Disconnect the harness connections to the sensor.
5. Using special tool 18G 1001, remove the sensor retaining ring.