XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
Power Seat Switch: Procedures
Powered Front Seat Switchpack
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove front seat for access.
3. Place seat inverted on clean working surface for access to underside.
4. Release cushion cover retaining strip from edge of seat frame.
5. Release cushion cover front elastic retaining straps from seat frame.
6. Position cushion cover sides for access to cushion pad, raise pad to access back of switchpack and disconnect harness multiplug.