XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
16. NOTE: Due to soldered connections, it is not possible to remove wiper/washer switch at this stage.+
Release windshield wiper/washer switch from switchgear bracket and position for access.
17. Remove cancellation module from mounting bracket.
18. Remove windshield wiper/washer switch/mounting bracket/audible warning speaker assembly from vehicle.+
Installation
1. Position windshield wiper/washer switch/mounting bracket/audible warning speaker assembly for access in vehicle.
2. Fit cancellation module to mounting bracket.
3. Fit wiper/washer switch to cancellation module/mounting bracket.
4. Fit flasher/lamp/trip switch to cancellation module/mounting bracket.
5. Position switchgear assembly on steering column and fit and tighten securing bolts.