XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
Steering Gear: Description and Operation
Steering Rack Assembly
Steering Rack Assembly
The steering rack assembly:
^
Is mounted on the rear face of the front suspension crossbeam by two forged mounting brackets with resilient bushes. The bushes are handed
(pinion side and non-pinion side) and are orientated according to the vehicle range application.
^
Converts the rotary motion of the steering wheel, via the steering gear pinion, to the lateral motion of the rack.
^
Features a variable ratio steering rack with integral hydraulic power steering cylinder and piston.
^
Has a hydraulic control valve with Servotronic control and positive center feel torsion bar.
The basic steering rack assembly is not serviceable. The following components are serviceable items:
^
Transfer pipework.
^
Servotronic valve.
^
Centralizing cap.
^
Outer ball joint.
^
Rack gaiter.
^
Clips and fittings.