XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
10. Raise jack to locate subframe bushes on the body tapered locations.
11. CAUTION: When installing subframe bracket ensure that wheel speed sensor harness is clear.
Fit suspension subframe mounting-brackets.
1. Position bracket to subframe.
2. Install but do not tighten bush center bolt.
3. Install but do not tighten bolts securing bracket to body.
^
Following same procedure, install mounting bracket on opposite side.
12. Tighten mounting bracket to body bolts to 80 -100 Nm.
^
Following same procedure, tighten mounting bracket bolts on opposite side.