XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1027006.png)
6. Remove spring pan to lower wishbone securing bolts.
7. WARNING:
WHEN TURNING TOOL ADJUSTER, ENSURE THAT TOOL STEM DOES NOT ROTATE AND DISTURB POSITION OF DOWEL IN
SUSPENSION TURRET.
Rotate adjuster of Special Tool to release tension from spring.
8. Remove spring assembly and Special Tool from suspension turret.
9. Remove Special Tool from spring assembly.
Installation
1. Install new spring pan, spring and spring rubber upper and lower seats on Special Tool 204-111.
2. Install Special Tool 204-111 and spring assembly in suspension turret.
^
Position spring assembly and Special Tool in suspension turret.
^
Ensure spring upper rubber seat is correctly positioned and fully seated.
^
Engage tool dowel in turret slot.
3. Position spring pan on lower wishbone.
^
Rotate adjuster of Special Tool 204-111 to lightly tension spring.
