XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1028014.png)
24. Install brake caliper on carrier.
1. Position caliper assembly on carrier.
2. Install guide pins and tighten to 25-30 Nm.
3. Install dust caps.
4. Install brake caliper spring clip.
25. Connect wheel speed sensor harness to sensor.
26. Using new tie strap, secure wheel speed sensor harness to brake hose clip.
27. Install rear wheel.
28. Remove stands and lower vehicle.
29. Carry out rear wheel alignment check and adjust as necessary.
