XJ-S V12-5.3L (1982)
primer to exposed bare metal and fit two additional vented grommets BD 46778, ensuring that the vents face to the rear of the vehicle (Fig.
2).
NOTE:
It is important that air flow to the grommets is unrestricted. It may be necessary to trim back the trunk floor carpets.
FIGURE 3
10.
Cut a section from the fuel tank trim cover to clear the vent assemblies (Fig. 3).
11.
Refit the trunk trim, fuel pump cover and spare wheel.
Repair Operation Number and Time:
76.91.08 1.85 hours
PARTS REQUIRED:
BCC 8509 Vent Assembly 2
BDC 4024PA
Parcel Shelf Trim Panel
1
BD 46778
Vented Grommets
2
1/8"
Pop Rivets
8
CAUTION: Part Numbers included in Service Bulletins are for reference only and should always be cross referenced with the latest parts
information.