XJ-S V12-5.3L (1982)
Muffler: Service and Repair
Right-Hand
SILENCER ASSEMBLY - RH
RENEW
Fig 4
Drive the car on to a ramp. Raise the ramp. Slacken off the clamp (1 Fig 1) securing the RH rear intermediate pipe to the RH silencer. Displace the
clamp and pipe (2 Fig 1).
Slacken off the clamp (3 Fig 3) securing the RH intermediate pipe (2 Fig 3) to the RH silencer. Displace and remove the silencer (1 Fig 3).
Smear the new silencer and intermediate pipe unions with sealant. Fit the silencer to the intermediate pipe. Smear the silencer and rear
intermediate pipe unions with sealant. Fit the silencer to the rear intermediate pipe.
Fit and tighten the clamps. Lower the ramp.
DATA
TORQUE FIGURES
Exhaust clamp nuts/bolts 15-18Nm
SPANNER SIZES
1/2AF
OILS/LUBRICANTS/SEALANTS
Exhaust sealer TIVOLI KAY ADHESIVES No 5696