XJ-S V12-5.3L (1982)
Inertia Fuel Shutoff Switch: All Technical Service Bulletins
Fuel - Inertia Switch Interference from A Post Trim
Number: J81/33
Date: December, 1981
Subject: Fuel Inertia Switch
Models: XJ-S
Some 1982 XJS Models between VIN 105048 and 105572 could have the A post trim fouling the inertia switch button.
Vehicles in the VIN range should be inspected for the condition during routine service and modified if necessary, as follows:
1. Remove plastic shield from inertia switch (Driver's side A post).
2. Check trim forward of button for a retaining screw.
3. If a retaining screw is not fitted, drill a 3/32 inch hold 1/4 inch and 1/4 inch upwards as illustrated by arrow in image.
4. Secure trim with a suitable sheet metal screw and dished washer.
Repair Operation No. 86.65.78 - Fuel Inertia Switch Trim Modification - 0.25 hours.
