XJ-S V12-5.3L (1982)
Ignition Control Module: Technical Service Bulletins
V12 Ignition Amplifier - Rationalization of Availability
DATE . . . FEBRUARY, 1985
NUMBER . . . J85/18
MODEL:
XJ-S
SUBJECT:
IGNITION AMPLIFIERS
MODEL AB3
KEY POINTS
RATIONALIZATION OF
V12 IGNITION AMPLIFIER AVAILABILITY
In order to rationalize the many part numbers for the Jaguar V12 ignition amplifier, one part, JLM 368, will now be used to cover the previous part
numbers.
FIGURE 1 - CONNECTIONS FOR REPLACING AMPLIFIERS PART NOS. (48012), (48018) and (48019) C34781 C39955 DAC1371
As you will see on the attached application list, the amplifier will be supplied separately as well as in Kit AEU 1373, together with a loose ballast resistor
molding and lead assembly (supplied with the amplifier) for the 9BR amplifier lead and should it be needed, a 6.8K ohm resistor, as shown in Fig. 1.
