XJ-S Convertible (XJ27) L6-4.0L (1996)
Cruise Control Vacuum Hose: Service and Repair
VACUUM SUPPLY HOSE
-
Open the bonnet and fit wing protection.
-
Remove the relay mounting bracket securing bolts situated left-hand inner wing.
-
Reposition the relay mounting bracket for access.
-
Disconnect the hose from the vacuum dump valve.
-
Disconnect the hose from the vacuum pump.
-
Disconnect the vacuum hose from the actuator.
-
Remove the hose assembly and disconnect hoses from 'T' piece.
-
Connect new hoses to the 'T' piece and fit the assembly, routing the longest hose to the actuator.
-
Remove wing covers and close bonnet.