XJ-S Convertible (XJ27) L6-4.0L (1996)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Oil Seat, Renew
-
Remove the crankshaft damper/pulley assembly.
-
Remove the old oil seal from the timing cover using Service Tool JD 128 (A Fig. 1).
-
Fit the new oil seal (prior to fitting the crank spacer) using Service Tool JD 129 and the crankshaft pulley bolt (B Fig. 1).
-
Inspect the edges of the spacer for nicks, burrs and wear marks. Renew if necessary.
-
Refit the crankshaft damper/pulley assembly.