jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Fluid - A/T|Service and Repair > < Fluid - A/T|Capacity Specifications|Page 688
Page 1
background image

Fluid - A/T: Testing and Inspection

Transmission oil level

-

Ensure that the transmission is at normal operating temperature, e.g. by conducting a 20 mile road test. If starting from cold: check for
presence of oil on dipstick at idle in 'P' Park to the 'Cold' fill mark before setting off.

-

Check that the vehicle is on level ground.

-

Firmly apply the parking and foot brakes and run the engine at idle speed.

-

To ensure that the system is primed, slowly move the selector lever through all the gear positions.

-

With the engine still running, engage 'P' Park, withdraw the dipstick and wipe with a lint free cloth.

-

Replace the dipstick slowly and withdraw it noting the level.

-

Top up as required and recheck the level.

Note:  The oil level can only be accurately checked when at normal temperature - approximately 20 miles at moderate speeds.

Fluid - A/T|Service and Repair > < Fluid - A/T|Capacity Specifications|Page 688