XJ-S Convertible (XJ27) L6-4.0L (1996)
/l6-4.0l/Page-476001.png)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature Sensor
1. Open the hood and fit a wing cover.
2. Open the trunk and remove the battery cover.
3. Disconnect the battery ground lead.
4. Disconnect the multi-plug from the IAT sensor.
5. Undo and remove the IAT sensor and copper washer from the induction elbow.
NOTE: Refitting a new IAT sensor is the reverse of the removal procedure.
