XJ-S Convertible (XJ27) L6-4.0L (1996)
/l6-4.0l/Page-1237002.png)
CAUTION:
The quarter trim pad may be damaged if the sill tread plate is not removed first.
5.
Carefully remove the fir tree fastener from the outboard side of the quarter trim using supporting material to protect the trim facing.
6.
Loosen the rear quarter trim to allow access to the upper part of the B post.
7.
Detach the plastic water deflector from the B post to expose the area where the belt guide will be installed.
8.
Clean the area thoroughly to ensure that the guide will adhere to the post.
9.
Remove the backing tape from the adhesive pad. Hold the seat belt to one side, align the guide with the access hole in the post (Illustration 2), and
press the guide firmly into position.
10.
Place the water deflector in position and mark where the deflector overlaps the belt guide. Cut away the deflector material as necessary to clear the
belt guide (angled arrow, Illustration 2). Press the deflector firmly into position.
11.
Reattach the rear quarter trim.
12.
Reinstall the sill tread plate.
13.
Repeat steps 5 through 13 on the opposite side of the vehicle.
14.
Reinstall the rear seat squab with its retaining screws.
15.
Push the seat belt buckles through the cushion and reinstall the rear seat cushion with its retaining screws.
16.
Return the front seats to their original positions.
PARTS INFORMATION:
