XJ-S Convertible (XJ27) L6-4.0L (1996)
Flywheel: Service and Repair
Transmission Adapter Plate
Engine Rear / Transmission Adapter Plate, Renew
Remove the engine flywheel (Manual), or the engine drive-plate (Automatic). Remove the lower bolt securing the starter motor and reposition the starter
motor away from the adapter plate.
-
Remove the adapter plate securing bolts and remove the adapter plate.
-
Remove the dowel pegs and blanking plugs from the adapter plate.
-
Discard the adapter plate.
-
Fit the blanking plugs and dowel pegs to the new adapter plate.
-
Fit the assembly to the rear of the engine and torque tighten the securing bolts.
-
Re-position the starter motor to the adapter plate and secure with the lower bolt.
-
Refit the engine flywheel (Manual), or the engine drive-plate (Automatic).