XJ-S Convertible (XJ27) V12-6.0L (1994)
Power Seat Control Module: Customer Interest
Seat Control Module - Loss of Seat/Mirror Functions
86-159
Seat Control Module -
Loss of Seat or Mirror Functions -
Repair Procedure
MODEL
XJS Range 1994 MY
VIN 190528 - 192880
DATE 7/95
ISSUE:
Loss of any driver seat adjustment, door mirror adjustment, or any combination of seat and mirror adjustments in 1994 MY XJS Range vehicles from
VIN 190528 - 192880, may be caused by a failure of the seat control module (SCM). If a function fails, it would cause the adjustment that it controls to
remain at its last set position. To prevent repeat failure of the SCM, the mirrors must also be replaced.
ACTION:
If the seat control module fails on a 1994 MY XJS Range vehicle within the VIN range listed above, BOTH door mirrors must be replaced with revised
mirror units when the SCM is replaced.
NOTE:
A production change within the VIN range added capacitors to the door mirror motors. The capacitors, which were added to reduce radio
interference, may induce an electrical resonance in the mirror circuit causing SCM failure.
PARTS INFORMATION:
WARRANTY INFORMATION: