XJ-S Convertible (XJ27) V12-6.0L (1994)
NOTE
The heatshrink must fully cover the exposed end of the wire insulation at the eyelet to seal the wires from water.
4.
Shrink the sleeve using a heat gun. The adhesive in the sleeve must completely seal the end of the ground wires.
CAUTION
Protect the inner fender paint work and surrounding components from excessive heat
5.
Repeat the sealing procedure on the second ground eyelet
6.
Clean both eyelets to assure good connections and apply multi purpose grease to the eyelets and the ground stud.
7.
Connect the cruise control pump harness plug and ground eyelets.
8.
Connect the battery, recode the radio, preprogram the radio stations, and reset the clock.
Parts/Warranty Information