jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Campaign - Ground Strap Installation|Page 2782 > < Campaign - Ground Strap Installation|Page 2780
Page 6
background image

44.

Loosen and remove the right side forward most ground point mounting bolt (Illustration 7).

45.

Move aside the right side forward ground eyelets.

46.

Clean the ground eyelets and the ground point using emery cloth.

47.

Reinstall the ground eyelets on the body.

48.

Reinstall and tighten the right side forward ground point mounting bolt.

49.

Using electrical grease, cover the ground eyelet and any exposed bodywork.

50.

Reinstall the right side forward luggage compartment trim.

51.

Reconnect the vehicle battery.

52.

Load the PDU at the base station with the latest disc.

53.

Load datalogger V12 fuelling and check the HO2S reference voltage.

Note:

See the PDU help text to check for correct operation. If a PDU is not available, use a DVOM to monitor the HO2S reference voltage, which
should oscillate frequently.

54.

Remove the fender protection covers.

55.

Close the luggage compartment.

56.

Close the hood.

Install Auxiliary Ground Straps XJ 12 Vehicles Only

INSTALLATION OF AUXILIARY GROUND STRAPS ON XJ12 VEHICLES ONLY

1.

Open the luggage compartment.

2.

Open the hood.

3.

Place fender protection covers over the front fenders.

4.

Disconnect the vehicle battery.

Caution: 

Ensure that the radio code is available before disconnecting the battery.

Campaign - Ground Strap Installation|Page 2782 > < Campaign - Ground Strap Installation|Page 2780