XJ-S Convertible (XJ27) V12-6.0L (1994)
/v12-6.0l/Page-638002.png)
3.
On the amplifier base plate, mark the position of the two new holes. Drill two 15/64" (6 mm) holes as shown in Illustration 2.
4.
Deburr the drilled holes. Use compressed air to clean drill chips from the amplifier and base plate.
5.
Remove the masking tape and inspect the inside of the connector housing to be sure it is clean.
6.
Reinstall the amplifier assembly using the new mounting holes.
WARRANTY INFORMATION:
SERVICE ACTION: S 439
Action:
Reposition ignition amplifier
Summary Code:
BQ
Reimbursement:
Labor
0.20 hrs.
Parts:
None
Action:
Reposition ignition amplifier - Renew right side catalytic convertor
Summary Code:
BR
Reimbursement:
Labor:
1.25 hrs.
Parts:
NHC 67700AA
