jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Engine - Intermittent Power Loss or Misfire|Page 1218 > < Main Relay (Computer/Fuel System)|Description and Operation|Page 1208
Page 1
background image

Ignition Control Module: All Technical Service Bulletins
Engine - Intermittent Power Loss or Misfire

18-41

Intermittent Power Loss - Tach Drops to Zero
-

Reposition Ignition Amplifier -

Service Action S 439

MODEL: XJS V12 Range 1994 MY      

DATE 7/94

From: VIN 188105
To: VIN 194706

ISSUE:

Symptoms of intermittent power loss or engine misfire, with the tachometer needle dropping to zero, may be caused by the under hood liner coming into
contact with the "A" bank (right) ignition amplifier connector housing. This may cause damage to the right side primary catalytic converter.

To prevent this contact from occurring, the ignition amplifier was repositioned at VIN 194707.

ACTION:

Modify the ignition amplifier base plate and reposition the right side ignition amplifier on all vehicles within the following VIN range at the next service
opportunity.

VIN 188105 to VIN 194706.

1.

Disconnect the "A" bank (right) ignition amplifier harness connector and remove the two amplifier base plate nuts illustration 1).

2.

Remove the amplifier assembly and carefully tape its connector housing with masking tape to prevent drill chips from entering.

Engine - Intermittent Power Loss or Misfire|Page 1218 > < Main Relay (Computer/Fuel System)|Description and Operation|Page 1208