XJ-S Convertible (XJ27) V12-6.0L (1994)
/v12-6.0l/Page-987002.png)
11.
Remove and discard the anti-rotation plate from the top of the B post (Illustration 1).
NOTE:
Do not install the anti-rotation plate with the new seat belt assembly.
12.
Install the rub strip edge finisher into the opening in the B post and over the insulation (Illustration 2).
13.
Install the new seat belt retractor unit and torque the bolt to 22.1 - 29.5 lb ft (30 - 40 Nm).
