XJ-S Coupe (XJ27) V12-6.0L (1994)
^
Hold the gear lever to the right of the gate. Position a long, thin screwdriver with the handle approximately 50~ toward the rear of the car and 2" to
the right and insert it through the shift gate dust seal at the REVERSE indicator. Refer to Fig. 3.
^
To release the pawl move the screwdriver forward with light pressure (do not force) and move the gear lever out of PARK.
^
If the lever will not move out of PARK, vary the screwdriver angle and depth slightly and repeat the procedure until the lever releases.
1994 MY XJS
^
Remove the gearshift lever selector bezel. Gently press down on the interlock release with a screwdriver through the access hole. Move the shift lever
out of PARK. Refer to Fig. 4.