XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Rear Door Exterior Handle: Service and Repair
Exterior Rear Door Handle (76.58.02)
Removal
1. Remove battery cover and disconnect earth cable from battery terminal.
2. Remove rear door casing.
3. Carefully withdraw water shedder passing harness through it and remove water shedder from door.
4. Place water shedder adhesive face down on clean dry plastic sheet.
5. Disconnect door handle operating link from lock assembly.
6. Firmly holding door handle, slacken and remove the two securing bolts.
7. Withdraw handle mounting bracket from door interior and remove handle from door.
8. Remove lock link rod from door handle assembly.