XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
13. Tighten mounting bracket bush center bolt to 80 - 100 Nm.
^
Following same procedure, tighten mounting bracket bush center bolt on opposite side.
14. Lower and remove jack.
15. Lower four-post lift.
Monostrut
Monostrut
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict
the number of times a nut or bolt can be used.
1. Raise rear of vehicle and support on stands.
2. Support rear suspension.
^
Position a piece of wood under rear edge of suspension unit.
^
Position and raise a jack under wood to support suspension unit.