XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
48. Remove wire temporarily supporting hub assembly.
49. Remove wishbone/hub assembly from crossbeam.
-
Supporting hub assembly, withdraw lower wishbone eccentric bolts.
-
Supporting hub assembly, withdraw fulcrum shaft from upper wishbone.
-
Remove wishbone/hub assembly from crossbeam.
-
Repeat procedure to remove wishbone/hub assembly on opposite side.
50. Remove crossbeam front mountings.
-
Remove front mounting heatshield.
-
Remove four bolts securing mounting to crossbeam.
-
Repeat procedure to remove mounting on opposite side.
51. With assistance position crossbeam on hydraulic press.
-
Place a suitable support on press bed.
-
Position and align crossbeam/bush on support.
52. Position a suitable mandrel on top of bush and operate press to remove bush from crossbeam.