XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
3. Remove console for access.
1. Slacken and remove two screws securing radio console to fascia, release two dowels and withdraw console for access.
2. Release clip retaining air conditioning panel harness.
4. Tilt bottom of radio console upwards and remove console from vehicle.
Installation
1. Position radio console for access and secure air conditioning harness in LH clip behind console.
2. Fit console to BIW and fit and tighten securing screws.
3. Position radio at console and connect multiplugs and ground and aerial leads.
4. Fully seat radio in console.
5. Fit centre console veneer panel. See: Center Console/Centre Console Veneer Panel
6. Fit 'J' gate finisher retaining panel. See: Center Console/Centre Console 'J' Gate Trim/'J' Gate Finisher Retaining Panel
7. Fit 'J' gate finisher. See: Center Console/Centre Console 'J' Gate Trim/'J' Gate Finisher
8. Connect ground cable to battery terminal and fit battery cover.
Removal and Installation
Removal
1. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Service and Repair
2. Open roof console sun glasses compartment.