XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
3. Rotate fastener 1/4 turn to release console.
4. Lower console from roof and disconnect lighting module harness multiplug and hands-free microphone harness multiplug if telephone is fitted.
5. Release roof console from retaining clips and remove from vehicle.
Installation
1. Position roof console at headlining and connect lighting harness multiplug and hands-free microphone multiplug if fitted.
2. Engage console in retaining clips.
3. Aligning with headlining aperture, seat console and rotate fastener 1/4 turn to secure.
4. Close sunglasses compartment.
5. Connect ground cable to battery terminal and fit battery cover. See: Starting and Charging/Battery/Service and Repair
Roof Console Veneer Panel