XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
6.
Disconnect seat cushion tilt motor drive cables.
7.
Disconnect seat module electrical connectors.
8.
Displace relay electrical connector from seat slide assembly.
9.
Displace seat harness fir tree fixings from seat slide assembly.
10.
Place seat slide assembly to one side.
11.
Working on left hand seat slide, displace and remove star locking washer from bun gee cord rear mounting post (Illustration 1).
12.
Displace bungee cord from rear mounting post (Illustration 2).