XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
7. Secure cushion cover front retaining straps to seat frame.
8. Pull cover over cushion pad and fit and fully seat cover edge retaining strip on seat frame.
9. Return seat to upright position
10. Connect cushion heater harness multiplug and fit multiplug onto retaining bracket.
11. Fit cushion cover to seat frame rear retaining strip.
12. Align rear edge of cushion cover with frame and fit and fully seat six retaining clips.
13. Fit seat back finisher.
14. Fit seat to vehicle.
15. Connect ground cable to battery terminal and fit battery cover.