XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-609009.png)
9. Remove brake disc from hub.
10. Remove brake dust from calipers, and from area of parking brake shoes, see WARNING above.
11. Repeat above procedure to remove opposite side brake disc.
12. Thoroughly clean the area of both hubs where they mate against the brake discs.
Installation
1. Install brake disc to wheel studs.
^
Make sure hub and brake disc access holes are aligned.
2. Set the parking brake.
3. Check brake disc run-out.
4. Install caliper to hub carrier.
^
Install and tighten bolts to 60 Nm.
