XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Parking Brake Lever: Service and Repair
Handbrake Lever
Hand Lever
Removal
WARNING: BRAKE DUST, IF INHALED CAN DAMAGE YOUR HEALTH. ALWAYS REMOVE BRAKE DUST USING A VACUUM
BRUSH. DO NOT USE A COMPRESSED-AIR LINE TO DISPERSE BRAKE DUST INTO THE ATMOSPHERE.
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict
the number of times a nut or bolt can be used.
1. Position vehicle on a four-post lift.
2. Release parking brake.
3. Release tension on parking brake cable.
^
Slacken but do not remove adjustment nut.
4. Release parking brake cable.
^
Remove clip.
^
Remove clevis pin.
5. Remove driver seat for access.
6. Remove trim from hand lever.
7. Carefully reposition carpet from around hand lever for access.