XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-636003.png)
3. Disconnect electrical connector
8. CAUTION: Remove brake fluid spillage immediately from paint work, with clean water.
Position an absorbent cloth underneath the HCU to collect brake fluid spillage.
9. NOTE: To minimize brake fluid loss, release the brake tubes from the HCU in the order shown.
Release brake tubes from HCU.
1. Undo union nuts and release inlet brake tubes.
^
Install plugs to HCU inlet ports and brake tubes.
2. Undo union nuts and release outlet brake tubes.
^
Install plugs to HCU outlet ports and brake tubes.
10. Remove HCU from vehicle.
^
Remove bolts.
^
Taking care not to distort brake tubes remove HCU.
