XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Valve Cover: Service and Repair
Valve Cover - RH
Valve cover RH
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. Disconnect the intake tube from the throttle body.
Remove the two bolts which secure the intake tube to the throttle body.
Disconnect the intake tube form the throttle body.
3. Disconnect the air cleaner cover.
Release the five clips which secure the air cleaner cover.
4. Disconnect the air flow meter electrical connector.
5. Remove the intake tube / air flow meter / air cleaner cover assembly.
Remove the intake tube / air flow meter / air cleaner cover assembly.
Remove and discard the rubber seal; air intake tube to throttle body.