XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
74.
Remove special tool 303-530 from bank 1 cylinder head. (Illustration 49)
75.
Install new 0-ring seals to bank 1 and bank 2 VVT oil control unit housings.
76.
Install bank 1 VVT oil control unit housing and tighten to 22 Nm. (Illustration 50)
77.
Install bank 2 VVT oil control unit housing and tighten to 22 Nm. (Illustration 51)
78.
Raise vehicle on lift.
79.
Install new 0-ring seals to oil strainer.