XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Power Steering Fluid: Service and Repair
System Filling and Bleeding (Vacuum Fill)
System Filling and Bleeding (Vacuum Fill)
Fluid Hoses
2. If vacuum filling equipment is available, proceed as follows:
^
Disconnect both the high pressure hose and return hose from the PAS pump and the return hose from the steering rack.
^
Drain as much fluid as possible from the system by turning the steering from lock to lock two or three times.
^
Reconnect all hoses.
^
Fill the system using the vacuum equipment according to the manufacturers instructions.
^
Start the engine and top up the fluid as necessary.
^
Turn the steering from lock to lock two or three times with the engine running, topping up with fluid as necessary.
^
If possible, run the engine for twenty minutes to expel any remaining air.