XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
7. Refit the centre trim panel and the left hand enclosure panel to the engine compartment.
1. Refit the centre trim panel.
2. Refit the left hand enclosure panel.
8. Raise the vehicle on the ramp.
9. Tighten the mounting bracket securing bolts.
10. Connect the downpipe catalytic converter to the front muffler.
1. Position a new gasket to the flange studs at each side.
2. Connect the the front muffler assembly to each downpipe.
3. Fit and tighten the nuts to secure the muffler to the downpipes.