XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Intake Air Duct: Service and Repair
Throttle Intake Elbow
Throttle Intake Elbow (SC)
Removal
1. WARNING: BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL THE WARNING, NOTES ARE READ AND UNDERSTOOD.
Disconnect battery ground cable.
2. Remove air cleaner cover / intake assembly.
3. Remove throttle assembly.
4. Remove exhaust gas recirculation (EGR) valve where installed.
5. Release intake elbow from right-hand support bracket.
-
Release brake servo vacuum pipe and disconnect pipe.
1. Disconnect vacuum pipe.
2. Remove upper bolt.
6. Release intake elbow from left-hand support bracket.
1. Disconnect vacuum pipe.
2. Disconnect engine breather T-piece.
3. Remove upper bolt.
4. Loosen, but do not remove, lower two bolts.