XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-707010.png)
^
Rotate adjuster of special tool 204-111 to release spring tension.
^
Remove special tool and adaptor from spring.
9. Position new link assembly on lower wishbone and install but do not tighten bolt.
10. Position new link arm ball joint stud in stabilizer bar and install but do not tighten nut.
11. Tighten new link arm to wishbone nut and bolt to 41 - 54 Nm.
