XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
25. Disconnect steering rack transducer harness front connector.
^
Release harness connector from body retaining clip.
^
Disconnect connector.
26. Support weight of crossbeam.
^
Position a jack under crossbeam.
^
Place a piece of wood between jack and crossbeam.
^
Raise jack to just support crossbeam.
27. From engine compartment, remove crossbeam front RH bolts.
28. Remove power steering fluid reservoir for access.
^
Remove reservoir securing nuts and bolts.
^
Position reservoir for access.
29. From engine compartment, remove crossbeam front LH bolts.