XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
20. Install shims on pivot pin sleeve in positions noted during removal.
21. Install hub assembly to wishbone assembly.
^
Position hub and carrier to wishbone.
^
Install pivot pin ensuring that eccentric flange correctly seats in wishbone groove.
22. Install pivot pin nut.
^
Align marker on pivot pin flange with mark made on wishbone.
^
Install nut on pivot pin and ensuring pin position is not disturbed, tighten nut to 88-118 Nm.
23. Release brake caliper from suspension tie.