XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-792004.png)
7. Remove nut securing link arm ball joint to stabilizer bar and remove link arm from vehicle.
8. Install special tool 204-111 in road spring.
^
Slacken tool adjuster to suit spring length.
^
Fit adaptor and thrust collar.
^
Position stem of tool in center of spring passing dowel through slot in suspension turret.
9. WARNING: WHEN TURNING TOOL ADJUSTER, ENSURE THAT TOOL STEM DOES NOT ROTATE AND DISTURB POSITION
